For equipment manufacturers · Westchester, NY

Custom OEM Component Design & Low-Volume Manufacturing

From the first CAD model to repeat production runs, we help equipment manufacturers develop specialized components without the tooling investment that mass production requires. Based in Westchester County, working with OEMs across New York, New Jersey and Connecticut.

Custom door panel, exploded in CAD
Overhead controller and display mount

Components we can develop

The parts between your machine and its equipment

We design and make the plastic components that hold, guide, protect and connect, shaped around your machine's geometry and the hardware it carries. Pictured: a controller mount we designed for an OEM mounting location in a vehicle, an example of the fit-driven work these components need.

  • Brackets and mounting hardware for sensors, cameras and controls
  • Enclosures, housings and protective covers
  • Guides, adapters and alignment components
  • Cable management and routing parts
  • Specialized fixtures for assembly and test

Process

From concept to repeat production

Each stage ends with something you can review, so decisions are made on real parts, not assumptions.

1

Requirements

Function, mating parts, environment, annual quantity and the constraints that matter.

2

CAD development

We model in Fusion 360, working from your drawings, CAD or a 3D scan of the machine.

3

Prototype validation

Printed prototypes go on the machine. We revise until fit and function check out.

4

Production prep

Material, process and settings are locked to the approved version.

5

Recurring supply

Batches are made from the approved design whenever you need them.

Why OEMs work with us

An engineering partner for parts nobody stocks

Custom design capability

Parts are designed around your equipment, not adapted from a catalog. See our CAD design services.

Rapid iterations

Design and printing under one roof means revisions move quickly from screen to part. See product prototyping.

Low-volume flexibility

Runs of 100 to 500 parts in-house, with no molds to amortize and room to improve the design between batches.

Local collaboration

Based in Westchester County. We can come to your facility in NY, NJ or CT to measure or 3D scan the machine.

How engagements work

Design services and manufacturing services

Development is paid engineering work: requirements, CAD, prototypes and revisions until the component is approved. Manufacturing is the recurring supply of that approved component, quoted per batch. Design ownership and file deliverables are agreed in writing for each project.

Develop
CAD, prototypes and revisions
Supply
Repeat batches of the approved part
Planned around your build schedule

Production planning

Planned around your build schedule

Once a component is approved, we plan supply with you, not just the next order.

  • Quantities: 100 to 500 parts per run in-house; larger runs and injection molding through partners
  • Revisions: design changes are controlled, so every batch matches the approved version
  • Materials: chosen for heat, chemicals, UV and wear, and confirmed on the prototype
  • Scheduling: about 100 parts typically within a week, depending on size; confirmed with each quote
  • Reorders: reference the part and we run it again with the same settings

Application examples

The kind of work this involves

Parts we've designed and made for other applications. They show the design-for-fit and repeat production that OEM components need; they are not OEM client projects.

Multi-part assembly in Fusion 360
Multi-part assembly modeled in Fusion 360
Flexible duct clamp mounts, made in repeat batches
Flexible duct clamp mounts, made in repeat batches
Custom LED light housing
Custom LED light housing
A finished batch, boxed for delivery
A finished batch, boxed for delivery

FAQ

OEM component questions, answered

What do you need to start a component project?

Whatever describes the part today: drawings, CAD, the old part, photos with dimensions, or access to the machine. We can 3D scan surfaces and mounting points when there's no CAD.

Is 3D printing suitable for production parts?

For many brackets, covers, guides and housings, yes, when the material and design suit the job. Not every part is a good fit. Prototypes are tested on the equipment first, and we'll tell you when a part should be machined or molded instead.

What quantities can you produce?

We print runs of 100 to 500 parts in-house. Larger quantities, injection molding and metal or CNC parts go through our manufacturing partners, using the same CAD model.

How are design and production priced?

Design development is quoted as engineering work: CAD, prototype rounds and revisions. Production is quoted per batch based on size, material and quantity.

Who owns the component design?

Ownership of the design and the files you receive are agreed in writing for each project, before development starts.

Can you make safety-critical or food-contact parts?

We don't make safety-critical components, and we don't assume a printed part is suitable for food, pharmaceutical or medical contact. Those requirements need to be specified and verified for each application.

Do you work with manufacturers outside Westchester?

Yes. We're based in Westchester County and work with equipment manufacturers across New York, New Jersey and Connecticut, and we ship finished parts.

Pricing

Two ways to get a price

Already have a print-ready file? Get an instant quote

For a finished STL, OBJ or 3MF file, pick a material and quantity and see a price right away.

Developing a component? Request a component review

For design work, prototypes and planned production, tell us about the part below and we'll reply with next steps and a quote.

Component review

Tell us about your component

Describe the part and the equipment it goes on. We'll reply with questions or next steps.

Have drawings or CAD files? Reply to our email with STEP, STL or PDF files after you submit. Please don't include confidential information until an NDA is in place, if you need one.