2011–Present Dodge Durango PPV Spotlight Delete Kit – A-Pillar Cover & Interior Cap

Clean up your 2011–present Dodge Durango PPV after removing the factory police spotlight with this purpose-built A-Pillar Spotlight Delete Kit.

Designed for former Police Pursuit Vehicle (PPV) Durangos, this two-piece kit covers the opening left behind after the A-pillar spotlight assembly is removed.

The kit consists of an exterior resin-printed cover and an interior ABS mounting cap. The exterior cover sits over the former spotlight location, while the interior cap installs from inside the vehicle through the existing spotlight opening and screws into place to complete the assembly.

The exterior cover is supplied RAW and unpainted, allowing it to be finished and painted to match your Durango.

IMPORTANT: The exterior resin cover MUST be painted and clear coated before regular exterior use. Raw resin should not be left exposed to prolonged UV light, as this may cause degradation, distortion, or warping. The interior ABS cap does NOT require painting.

Key Features

✔️ Fits 2011–Present Dodge Durango

✔️ Designed for PPV Spotlight Delete Applications

✔️ Two-Piece Design – Exterior cover + interior mounting cap

✔️ Uses Existing Spotlight Opening

✔️ Cleans Up the A-Pillar After Spotlight Removal

✔️ Exterior Cover is Resin 3D Printed

✔️ Interior Cap is 3D Printed in ABS

✔️ Exterior Cover Can Be Painted to Match the Vehicle

✔️ Ideal for Former Police / PPV Vehicle Conversions

Fitment

Designed for 2011–present Dodge Durango PPV vehicles equipped with an A-pillar police spotlight.

This kit is intended for vehicles where the spotlight assembly has been removed and the remaining opening needs to be covered.

Please verify your vehicle and spotlight configuration before ordering.

Material & Finish

Exterior Cover

Material: 3D Printed Resin
Finish: RAW / Unpainted

The exterior cover may require sanding, priming, and other normal paint preparation depending on your desired final finish.

The exterior resin component MUST be painted and clear coated before prolonged exposure to sunlight. Proper automotive paint and clear coat provide the UV protection necessary to help protect the resin from degradation and warping.

Interior Cap

Material: 3D Printed ABS Plastic

The interior mounting cap installs inside the vehicle and does not need to be painted or clear coated.

Installation Notes

Remove the existing PPV spotlight assembly.

Test-fit both components before painting.

Prepare, prime, paint, and clear coat the exterior resin cover.

Position the exterior cover over the original spotlight location.

Install the ABS cap from inside the vehicle through the existing spotlight opening.

Screw the assembly together and verify proper fitment.

Professional paint/body preparation is recommended for the best exterior finish.

What's Included

1x RAW Resin Exterior A-Pillar Spotlight Delete Cover

1x ABS Interior Mounting Cap

Paint, primer, clear coat, and additional installation supplies are not included.

Important Finish Requirement

DO NOT leave the exterior resin cover raw for exterior use.

The exterior cover must be painted and clear coated to protect it from UV exposure and help prevent degradation or warping.

Only the exterior resin cover requires finishing. The interior ABS cap can be installed as supplied.

Why You'll Love It

Removing the spotlight from a former PPV Durango can leave a very obvious opening in the A-pillar. Rather than leaving the area unfinished, this two-piece kit provides a purpose-built solution that utilizes the existing spotlight opening and gives the exterior a much cleaner appearance once painted to match the vehicle.